Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable MSRP: Now: $169.99 Add to Cart Compare Quick view MasterPiece Arms Matrix Pro Magwell Plate – Mag Blocker MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL MAGPUL PMAG® 27 GL9® – GLOCK® MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works Vudoo Gun Works V2210 10-Round Magazine MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods Harris Bipods S-BRM Bipod MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac Accu-Tac G2 Rubber Feet MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac Accu-Tac HD-50 Bipod MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view MasterPiece Arms Matrix Pro Magwell Plate – Mag Blocker MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL MAGPUL PMAG® 27 GL9® – GLOCK® MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works Vudoo Gun Works V2210 10-Round Magazine MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods Harris Bipods S-BRM Bipod MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac Accu-Tac G2 Rubber Feet MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac Accu-Tac HD-50 Bipod MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
SALE Quick view Foundation Stocks Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL MAGPUL PMAG® 27 GL9® – GLOCK® MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works Vudoo Gun Works V2210 10-Round Magazine MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods Harris Bipods S-BRM Bipod MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac Accu-Tac G2 Rubber Feet MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac Accu-Tac HD-50 Bipod MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Foundation Stocks Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL MAGPUL PMAG® 27 GL9® – GLOCK® MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works Vudoo Gun Works V2210 10-Round Magazine MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods Harris Bipods S-BRM Bipod MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac Accu-Tac G2 Rubber Feet MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac Accu-Tac HD-50 Bipod MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view MAGPUL MAGPUL PMAG® 27 GL9® – GLOCK® MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works Vudoo Gun Works V2210 10-Round Magazine MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods Harris Bipods S-BRM Bipod MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac Accu-Tac G2 Rubber Feet MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac Accu-Tac HD-50 Bipod MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Vudoo Gun Works Vudoo Gun Works V2210 10-Round Magazine MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods Harris Bipods S-BRM Bipod MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac Accu-Tac G2 Rubber Feet MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac Accu-Tac HD-50 Bipod MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Harris Bipods Harris Bipods S-BRM Bipod MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac Accu-Tac G2 Rubber Feet MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac Accu-Tac HD-50 Bipod MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Accu-Tac Accu-Tac G2 Rubber Feet MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac Accu-Tac HD-50 Bipod MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Accu-Tac Accu-Tac HD-50 Bipod MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Accu-Tac Accu-Tac Sled Feet MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries B&T Industries Atlas BT17: 4" 1913 Picatinny Rail MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries B&T Industries Atlas BT23: Ski Feet MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries B&T Industries Atlas BT32: Standard Rubber Feet MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp MSRP: Now: $240.00 Add to Cart Compare Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Flatline Ops Tango RM ACCU/LEVEL™ Articulating, Fine-adjustable The new, revised TANGO RM™ 2.0 ACCU/LEVEL™, is Flatline Ops' only picatinny rail mounted scope level, fitting all Mil Spec** rails. The new 2.0 is now 7075-T6 aerospace grade aluminum, for a stronger, longer lasting device for your rifle... MSRP: Now: $169.99 Add to Cart Compare Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Matrix Pro Magwell Plate – Mag Blocker This magwell plate for the Matrix Pro Chassis is designed to protect the magazine during positional shooting. It also provides the benefit of giving the shooter the ability to load the rifle into the positional bag during these positional shooting stages... MSRP: Now: $59.99 Out of stock Compare SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
SALE Quick view Foundation Stocks Custom Centurion (Used/Trade In) For Impact 737R Left-Handed Action + Hawkins M5/Impact Hawkins Rem 700 Short Action DBM, Standard Weight Dark Distressed Finish Left-Handed Stock With Full Length 1.5″ Dovetail And Wiebad Stock Pad The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Was: $1,580.00 Now: $1,343.00 Out of stock Compare Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Foundation Stocks Custom Centurion For Vudoo Right-Handed Actions and DBM's, Standard Weight Coyote Finish Right-Handed Stock With Full Length 1.5″ Dovetail (RRS Compatible Rail) The Centurion features a grip almost identical to what is found on the Revelation, vertical and close proximity to the trigger. The forearm has a full 2.6” flat on the bottom to allow for a large amount of bag contact during positional... MSRP: Now: $1,550.00 Out of stock Compare Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view MAGPUL PMAG® 27 GL9® – GLOCK® The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM... MSRP: Now: $19.95 Out of stock Compare Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Vudoo Gun Works V2210 10-Round Magazine V-2210 10 round AICS format magazine for both 22lr and 17HM2. MSRP: Now: $39.95 Out of stock Compare Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Harris Bipods S-BRM Bipod Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments (What’s this?) Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight... MSRP: Now: $110.00 Add to Cart Compare Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Accu-Tac G2 Rubber Feet If you own any of the listed Accu-Tac bipods, you will need the G2 Rubber Feet: G2 Rubber feet are for the following Accu-Tac bipods: -HD-50 -FC-10 -FC-4 G2 -FC-5 G2 -WB-5 -WB-4 -PC-5 -PC-4 -LR-10 -LR-10 QD -LR-10 G2 -SR-5 G2 -BR-4 G2 -All Arca model... MSRP: Now: $5.00 Out of stock Compare Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Accu-Tac HD-50 Bipod The HD-50 was designed for the 50 BMG caliber platforms. This is Accu-Tac's Heavy Duty and most robust bipod. The arm lock lugs are larger to withstand the heavy recoil of a 50 BMG. This bipod has the ability to cant and has a very sturdy throw lever... MSRP: Now: $383.00 Out of stock Compare Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Accu-Tac Sled Feet The Accu-Tac Sled Feet are perfect for F-Class users, and soft or flat terrains. The Sled Feet are compatible with all Accu-Tac bipods. They are screwed in and come with the needed hardware for any G1 or G2 bipod models. Specs: Materials 6061... MSRP: Now: $72.50 Out of stock Compare Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries Atlas BT17: 4" 1913 Picatinny Rail The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels... MSRP: Now: $29.95 Out of stock Compare Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries Atlas BT23: Ski Feet The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless-steel plunger. They will lay flat in the 90-degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod... MSRP: Now: $49.95 Out of stock Compare Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries Atlas BT32: Standard Rubber Feet The BT32 Atlas Standard Rubber Feet is the standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless-steel plunger. Sold as a pair. Available in black only. MSRP: Now: $19.95 Out of stock Compare Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries BT46-NC PSR Atlas Bipod: Standard height No Clamp The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance,... MSRP: Now: $260.00 Out of stock Compare Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view B&T Industries BT65-NC CAL Atlas Bipod: Standard height with No Clamp The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two-hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger... MSRP: Now: $240.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected
