Product Description
MPA Weight Tuning System
The MPA Weight Tuning System was developed to give the shooter the ability to weigh tune their MPA Chassis or rifle. This can be achieved by the addition of the entire weight system, or by using select weights for establishing desired balance points for their setup. If you are looking to improve your ability to spot impacts through weight enhancement, or simply want to change the balance point of your rifle assembly, MPA's weight tuning kit is the ideal addition to your chassis.
The weights can be purchased as a full kit (4 pieces), just the fore end weights (2 pieces), or just the rear weights (2 pieces).
The Complete Weight Tuning Kit for the Matrix Chassis includes the following:
- Steel Round Buttstock Weight – 1 lb
- Front Fore-end Weight – 0.8 lbs
- Rear Fore-end Weight – 0.8 lb
- 8 Front Fore-end clamps
- 8 Button Head Cap Screws for the clamps
- Fastener for Attaching the Round Buttstock Weight
The Complete Weight Tuning Kit for the full-size BA/Comp Chassis & ESR Chassis includes the following:
- Steel Enhanced Bag Rider – 1.2 lbs
- Steel Monopod Weight – 1 lb
- Front Fore-end Weight – 1.2 lbs
- Rear Fore-end Weight – 1 lb
- 8 Front Fore-end clamps
- 8 Button Head Cap Screws for the clamps
- Fasteners for Attaching the Bag Rider and Monopod Weight
The BA/Comp & ESR Chassis Fore-End Weight kit includes the following:
- Front Fore-end Weight – 1.2 lbs
- Rear Fore-end Weight – 1 lb
- 8 Front Fore-end clamps
- 8 Button Head Cap Screws for the clamps
The Complete Weight Tuning Kit for the Hybrid Chassis includes the following:
- Steel Enhanced Bag Rider – 1.2 lbs
- Steel Monopod Weight – 1 lb
- Front Fore-end Weight – 0.8 lbs
- Rear Fore-end Weight – 0.7 lb
- 8 Front Fore-end clamps
- 8 Button Head Cap Screws for the clamps
The Hybrid Chassis Fore-End Weight kit includes the following:
- Front Fore-end Weight – 0.8 lbs
- Rear Fore-end Weight – 0.7 lb
- 8 Front Fore-end clamps
- 8 Button Head Cap Screws for the clamps
The Buttstock Weight Kit (compatible with the BA, Comp, ESR, and Hybrid) includes the following:
- Steel Enhanced Bag Rider – 1.2 lbs
- Steel Monopod Weight – 1 lb
- Fasteners for Attaching the Bag Rider and Monopod Weight
The fore end weights in the full-size kit are NOT compatible with:
- Savage Long action inlet chassis
- Older style chassis: If your chassis looks like the one shown in the image (pay close attention to the radius rib pictured), then it will work with the fore end weights. Please keep in mind we will be adding the older chassis configuration to our offering, so please check back often.
Both rear weights are not compatible with all our chassis, except the Ultra Lite WITHOUT the side folder (they are compatible with the Ultra Lite side folder).
